Request a Quote
Standard Features:
  • With the exception of our hawk series, all of our steam generators are built by an ASME Certificate holder in accordance with ASME BPVC Section I – Rules for Construction of Power Boilers (“ASME BPVC Section I”).  They also comply with the requirements outlined in The National Board Synopsis of Boiler and Pressure Vessel Laws, Rules and Regulations (NB-370) RULES FOR CONSTRUCTION AND STAMPING section, which for many jurisdictions include but are not limited to ASME BPVC Section I, ASME CSD-1, ASME B31.1, and REGISTRATION WITH THE NATIONAL BOARD.
  • Dual Pressure Controls (UL 353)
  • Low Level Cut-Off (LLCO) (UL 353)
  • Safety Relief Valve possessing the ASME V Mark (these valves are built by a manufacturer holding a valid ASME Certificate of Authorization)
Included Options (Standard for Eagle Series Generators):
  • Steam Gun (33 ft Hose)
  • Steam Tool Accessories Kit
Click here to read the NB-370 synopsis.
Unit of Measure

Specifications

Brands

 N/A Electro-Steam™

Electrical Power

 N/A 75 kW

Boiler Horse Power

 N/A 7.5 bhp
Alternating Current (AC) Power Supply Voltage1 N/A 440 V480 V600 V

Phase

 N/A 3

Frequency

 N/A 50 Hz60 Hz

Approximate Heat Up Time

 N/A 30 min
Steam Capacity2 N/A 258.8 lb/hr117.4 kg/hr

Water Consumption

 N/A 31.0 gal/hr117.4 L/hr

Gross British Thermal Units (BTU) Output

 N/A 251,065 Btu/hr

Maximum Boiler Pressure

 N/A 200 psi

Operating Pressure Range

 N/A 5 to 160 psi

Operating Pressure (Factory Set Point)

 N/A 160 psi

Boiler Temperature

 N/A 212 to 371 ºF

Temperature at Tip

 N/A 212 ºF

Maximum Boiler Capacity

 N/A 26.5 gal

Boiler Fill Capacity

 N/A 22.0 gal

Reservoir Tank Capacity

 N/A 28 gal
Boiler Material 3 N/A Carbon Steel

Cabinet Material

 N/A 304 Stainless Steel

Plumbing Material

 N/A Brass (Schedule 80) Carbon Steel (Schedule 80)

Crated Weight

 N/A 1,400 lb

Industry Standards

 N/A American Society of Mechanical Engineers (ASME) - CSD-1 Compliant American Society of Mechanical Engineers (ASME) - Miniature Boiler Code American Society of Mechanical Engineers (ASME) Section I - V-Stamp Underwriters Laboratories (UL 353)

Cleaning Method

 N/A Dry Steam

Amperage

Amperage at 440 VAC (3Ø Phase)

 N/A 98.4 A

Amperage at 480 VAC (3Ø Phase)

 N/A 90.2 A

Amperage at 600 VAC (3Ø Phase)

 N/A 72.2 A

Dimensions

Length

 N/A 75 in

Width

 N/A 27 in

Height

 N/A 69 in

Included Options

EAG00001 Steam Gun Complete with 33 Feet (ft) Hose (Qty:1)

 N/A
 

EAG00005 8 Inch (in) Curved Lance (Qty:1)

 N/A
EAG00005 8 Inch (in) Curved Lance (Qty:1)

EAG00006 16 Inch (in) Curved Lance (Qty:1)

 N/A
 

EAG00007 35 Inch (in) Curved Lance (Qty:1)

 N/A
EAG00007 35 Inch (in) Curved Lance (Qty:1)

EAG00008 1 Inch (in) Circular Nylon Brush (Qty:6)

 N/A
EAG00008 1 Inch (in) Circular Nylon Brush (Qty:6)

EAG00009 1 Inch (in) Circular Bronze Brush (Qty:6)

 N/A
EAG00009 1 Inch (in) Circular Bronze Brush (Qty:6)

EAG00010 1 Inch (in) Circular Stainless Steel Brush (Qty:6)

 N/A
EAG00010 1 Inch (in) Circular Stainless Steel Brush (Qty:6)

EAG00011 2.5 Inch (in) Circular Nylon Brush (Qty:6)

 N/A
EAG00011 2.5 Inch (in) Circular Nylon Brush (Qty:6)

EAG00012 2.5 Inch (in) Circular Bronze Brush (Qty:6)

 N/A
EAG00012 2.5 Inch (in) Circular Bronze Brush (Qty:6)

EAG00013 2.5 Inch (in) Circular Stainless Steel Brush (Qty:6)

 N/A
EAG00013 2.5 Inch (in) Circular Stainless Steel Brush (Qty:6)

EAG00014 2.5 Inch (in) Circular Scrubbing Pad Holder (Qty:3)

 N/A
 

EAG00015 Scrubbing Pads (Qty:12): Black - Heavy Duty (Qty:4)/Green - Medium Duty (Qty:4)/White - Light Duty (Qty:4)

 N/A
 

EAG00038 Heat Resistant Gloves (Qty:1)

 N/A
 

EAG00039 Safety Glasses (Qty:1)

 N/A
 

EAG00055 O-Rings for Steam Gun Connector (Qty:25)

 N/A
 

EAG00067 O-Rings for Steam Gun Tip (Qty:25)

 N/A
 

More Options

  • 1 Every Eagle Series electric steam generator is custom built to accommodate only one (1) specific three phase (3Ø) high voltage supply; the attached 25 foot (ft) flexible power cord (plug/socket not included) is sized according to the customer’s specified
  • 2 Calculations are based off of a 212 ºF boiler feed-water temperature. Boiler feed-water temperatures that range between 60 ºF and 140 ºF, are approximately 80 % to 90 % of the calculated values shown. Boiler feed-water must not exceed 140 ºF.
  • 3 Wetted Surfaces